Pneumatic-Static Oxygen Test Stand

DESCRIPTION

​

The HP Pneumatic Stand should be supplemented with a pressure source of filtered, clean, dry flow of pressurized gas. This pressure source can be regulated within specified parameters as required using the features on Module 1. The flow meters on Module 2 can be configured in-line either on the inlet or outlet ports of the UUT.

The test-enabled modules are set according to the conditional parameters required for each test in the UUT’s CMM. Prior to operation of the equipment, the user must check and secure necessary connections while confirming unused ports are capped. This ensures safety and improves accuracy.

​

TECHNICAL INFORMATION

​

Electrical Input:            115 VAC 50/60 Hz

Maximum Pressure:    3000 PSI

Minimum Pressure:     0 PSI

Maximum Flow:            1000 LPM

Minimum Flow:              0 LPM

Length:                             20.8 Inches

Width:                              12.75 Inches

Height:                             36.75 Inches

​

​